25 Yard RoRo Skip Hire for Bulky Commercial Waste
Hire a 25-yard RORO if you need a mid-sized roll-on roll-off container for large volumes of mainly light, bulky waste from commercial premises and construction sites.

A 25-yard RoRo container holds approximately 19.1 cubic metres of waste. It is typically around 6.1 metres long and 2.4 metres wide, with sides of about 1.6 metres. That makes it a good middle option: noticeably more capacity than a 20-yard RoRo, but still low enough to load by hand without too much difficulty.
The 25-yard is mainly used for light and bulky waste, such as packaging, timber, furniture and strip-out materials from commercial premises, industrial units and construction sites. Heavy waste is generally restricted. We arrange RoRo containers through licensed suppliers in our network across England, Scotland and Wales, with delivery by hook-loader lorry subject to site access.
If you need 25-yard RORO skip hire in the UK, please call 0333 121 1056 or request a RORO skip hire quote online.
25 Yard RoRo Skip Hire services
Typical applications
Businesses use 25-yard RoRos for warehouse and stockroom clear-outs, distribution centres with large volumes of packaging, and retail and office strip-outs. On construction sites they handle light, bulky waste from soft-strip, fit-out and roofing work. Industrial sites use them for production waste, pallets and offcuts. Domestic use is rare and only practical on large properties with excellent access.
Our roll-on roll-off skip hire page explains how RoRo hire works across the network.
Weight and loading considerations
A 25-yard RoRo is designed for volume. Soil, rubble and concrete are generally restricted because a container this size full of dense material would far exceed safe and legal transport weights. Weight allowances vary by supplier and are confirmed at booking.
With sides around 1.6 metres, hand loading is still manageable, and machine loading is straightforward. Spread waste evenly along the container, place long items flat and keep the load below the top edge so it can be sheeted for transport. Many RoRo containers have a rear door for walk-in loading – check with the supplier if this matters for your job.
Placement, access and permits
Hook-loader lorries need a long, straight run – typically around 25–30 metres including the vehicle – on firm, level ground, with clear overhead space for the lifting arm. Gateways, kerbs, soft verges and overhead cables should all be checked before delivery, and the supplier confirms access in advance.
Containers are normally placed on private land, such as a yard, loading area or site compound, so no permit is needed. Road placement is uncommon and subject to council approval – the highway authority in England, the local council in Scotland or the local authority in Wales.
Hire duration and collection
RoRo hire periods vary by supplier and are often arranged around the length of the project. Containers can be exchanged when full, or on a regular schedule for continuous operations. Each collection is recorded with a waste transfer note, and waste goes to an authorised facility. For businesses with smaller daily volumes, wheelie bin hire can complement a RoRo.
Smaller, larger and alternative sizes
The next size down is the 20-yard RoRo, with lower sides and some capacity for heavy waste. The next size up is the 30-yard RoRo, for larger volumes of light waste.
If a 25-yard RoRo is not available locally, we will usually recommend a 20-yard where the waste is denser or a 30-yard where it is light and bulky, taking site access and supplier availability into account.
Waste usually accepted in a 25 yard RoRo
- Cardboard, packaging and shrink-wrap
- Pallets, timber and joinery offcuts
- Non-upholstered furniture and office fittings
- Shop and warehouse racking
- Insulation and light strip-out materials
- General commercial and industrial waste
- Scrap metal
Restricted and prohibited waste
- Asbestos or any material suspected of containing asbestos
- Upholstered sofas, armchairs and other domestic seating (may contain POPs)
- Fridges, freezers, TVs, monitors and other electrical items (WEEE)
- Tyres
- Gas bottles and pressurised canisters
- Batteries of any kind, including car and lithium batteries
- Paints, solvents, chemicals, oils and fuel
- Fluorescent tubes and energy-saving bulbs
- Clinical or medical waste
- Plasterboard, unless arranged in advance and kept separate
- Large quantities of soil, rubble or concrete
Not sure? See our waste types guide or ask us when you book.
Ideal for
- Warehouse and stockroom clear-outs
- Retail and office strip-outs
- Soft-strip and fit-out waste on sites
- Industrial production waste
- Distribution centres with heavy packaging volumes
25 Yard RoRo Skip Hire – your questions answered
Can’t see your question? Call 0333 121 1056 or send us a message.
How much does a 25 yard RoRo hold?
Approximately 19.1 m³ of waste. Typical dimensions are around 6.1 m long, 2.4 m wide and 1.6 m high, varying by supplier.
Can I put rubble in a 25 yard RoRo?
Generally only small amounts, if the supplier agrees. For hardcore and heavy construction waste, a 20-yard RoRo or smaller skips are more suitable.
What access does a 25 yard RoRo need?
A long, straight run for the hook-loader, typically around 25–30 metres, on firm, level ground with overhead clearance. The supplier confirms your site’s suitability.
Can RoRo containers be exchanged regularly?
Yes. Exchanges can be arranged on request or on a schedule, subject to supplier availability, so busy sites always have an empty container.
How do I arrange a 25 yard RoRo?
Request a quote online or call 0333 121 1056 with your postcode, waste type and site access details.
Often booked with 25 Yard RoRo Skip Hire
Need more than one service for the same project? Add them to one enquiry and we’ll coordinate them together.
Get a free, no-obligation quote
Tell us the site postcode, what you need and when – add as many services as the project needs. Photos, site plans or data sheets help us price accurately.
NationwideSkipHire.com is operated by Waste Cloud Ltd. Services are carried out by licensed suppliers in our network across England, Scotland and Wales.