Waste and Haulage for Groundworks Contractors

Foundations, drainage runs, service trenches and external works generate heavy material: clay, topsoil, stone and broken concrete. Skips fill quickly and can easily exceed weight limits, so the right equipment matters. Loads are often needed at short notice, and access can be restricted by excavations, scaffolding or neighbouring properties.

• Grab lorries that can reach over obstacles to load loose spoil
• Tippers and muck-away for bulk excavated material
• Smaller builders’ skips for heavy waste within limits
• Aggregates such as MOT Type 1, sand and gravel
• Road sweepers for cleaning up after muck-away
• Ready-mix and concrete pump hire for foundations

Soil and rubble are usually better suited to smaller skips or a grab than to large containers. Our guide is grab hire cheaper than skip hire? explains the trade-offs.

If you work for several main contractors or housebuilders across a region, we coordinate local providers for each site through one team. Larger operations can use a national account for consolidated job history and documents.

The most common problem on groundworks jobs is a skip that is too large for heavy material, leading to overweight charges or a container that cannot be lifted. Telling us the material type and approximate volume lets us recommend the right option, whether that is a 6 yard skip, a grab lorry or a run of tipper loads.

If access is tight or the excavation is behind a wall or fence, mention it when booking. Grab lorries can typically reach several metres from the roadside, though reach varies by vehicle and is confirmed by the supplier. Where a load is mixed with other waste, it may need to be treated differently from clean soil.

Waste transfer notes are issued for every load. Suppliers’ waste carrier registrations, insurance and environmental permits are checked in WastePrime, and linked receiving facilities are recorded, supporting your duty of care.